One machine on which a part is made from start to finish.
AVIAturn 35MY — a CNC lathe with a Y axis and live tooling. Turning, milling, cross drilling and threading in a single setup.
Why it matters
One setup instead of three.
A part turned on a plain lathe that needs a milled flat and a cross hole then travels to a milling machine — a second setup, a second datum and a second source of error. The Y axis and live tooling of the AVIAturn 35MY do all of it without taking the part out of the chuck.
In practice this means three things: more accurate relative position of the machined surfaces, a shorter lead time, and a lower price at small quantities — because at ten pieces the changeovers cost the most, not the machining itself.
Machinery
What the AVIAturn 35MY lathe can machine.
Everything below is done on one machine — no subcontracting and no downtime between operations. Live tooling and a Y axis mean a part with a milled flat, a cross hole or a keyway leaves the lathe finished.
- Maximum turning diameter
- up to 350 mm over the bed
- Maximum turning length
- up to 580 mm
- Bar stock through the spindle
- up to Ø65 mm
- Spindle bore
- Ø75.5 mm
- Three-jaw chuck
- Ø210 mm
- Spindle speed
- up to 5000 rpm
- Tool turret
- 12 positions
- Live tooling
- yes, up to 5000 rpm
- Y axis
- ±50 mm
- Control
- FANUC 0i-TF
- Tolerances
- IT7 as standard, tighter on request
- Minimum quantity
- 1 piece
Your part does not fit within these dimensions? Write anyway — some jobs we split into operations, others we pass on to a trusted shop nearby.
Materials
What we turn.
- Structural steels
- S235, C45, 16MnCr5, 42CrMo4
- Stainless steels
- 1.4301, 1.4404, 1.4571
- Aluminium
- PA6, PA38, EN AW-7075
- Brass and bronze
- CuZn39Pb3, CuSn12
- Plastics
- POM, PA6, PTFE, PEEK
We can buy the material or you can supply your own. For a single piece the latter usually works out cheaper.
Operations
What the machine does in one setup.
External and internal turning, facing, grooves, undercuts, tapers, contour-copied shapes, parting off.
Metric, imperial and trapezoidal threading, axial and cross drilling, milling of flats, keyways and splines, holes on the circumference and on the face.
Wycena
Not sure your part will fit? Ask.
A drawing or two overall dimensions are enough. We reply the same or the next working day.
Request a quote